X96Q Android TV Box Dead Recover 100% Tested Solution

Dead boot repair and unbricking are related to restoring a device that has become unusable or "bricked" due to a faulty firmware update, corrupted software, or hardware issues. Here's a general outline of the process: Determine if the device is in a dead boot state (won't turn on or boot up). Use a USB cable to connect the device to a computer. Utilize software like PhoenixSuit Allwinner Tool to detect and repair the device. Reflash the firmware to restore the device to a working state. In this tutorial, you will learn how to dead recover X96Q Android TV Box Allwinner CPU chipset H313 by using the PhoenixSuit tool.

Android Version 10

Board Version: BA301_627_V1.3

Requirements

Download PhoenixSuit Tested Version
Download X96Q Firmware Tested Version
USB To USB Cable
Dissemble X96Q TV BOX

Step By Step Method - Solution

Download and install Phoenix Tool, drivers will automatically install.
Download and extract the TV Box firmware, after extraction, you will get .img file
Open the PhoenixSuit tool and select the X96Q TV Box firmware file (.img)
Dissemble the X96Q TV Box and shorten the Test point. (As shown in the picture)
The device will be detected in the Device Manager and a pop-up will appear on PhoenixSuit Click "yes" to begin the flashing process.
Wait for the process to complete (this may take a few minutes).
Congratulations! Firmware upload successful.
Disconnect the USB cable from the TV Box and power ON it.