Itel Magic 2 Max IT6330 PAC File 100% Tested

PRE-Requirements:

1. Spreadtrum (SPD) USB Drivers
2. SPD Upgrade Tool
3. Stock ROM for Itel Magic 2 MAX

How To Flash Itel Magic 2 MAX Without BOX?

1. First of all, you need to download and install SPD USB Drivers on the PC,  if already installed skip this step.
2. Now you need to download Firmware (Stock ROM) PAC flash file for your phone.
3. Download and Extract SPD (Spreadturm) Flash tool. After extracting open it.
4. Within the Spreadtrum Upgrading Tool click on the setting icon and upload the PAC flash file. You will see a blue line filling at the bottom of the flash tool.
5. When the file is uploaded, click on the Start button, Turn off your phone and connect the USB data cable while holding (Boot Key).
6. The flashing process will be started, wait until the Green Passed message appears. 

Disclaimer: infinityrom.com is  not responsible for any damage caused to your phone. Please backup you phone firmware and important user data before flashing. Your all user data will be erased during flashing procedure. This file is 100% tested by me. Don't flash this file on others phone.

CM2 Read Info

Device Connected!

BootVersion : SPRD3

BootSource  :  InternalLibrary

BootVersion : Spreadtrum Boot Block version 1.2

Port speed : 921600

FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q64 : 0x00800000 [ 8MiB ]

Read Flash Ok, Size : 8.00 MiB

Platform Version: MOCOR_12C.W13.04.14_Debug

GC2809_it6330_64X64_240X320BAR_EnUr_PK

Project Version:   it6330-GC2809-EnUr-PK-20200327

MMI Version:       it6330-GC2809-EnUr-PK-20200327

BASE  Version:     BASE_SVN

HW Version:        fp6531_bar

03-27-2020 14:05:08

LOG Version:      V1.0.1

Firmware Info And Link

Device Name: ITEL

Model Name: IT6330

CPU Name: SPD

CPU Type: SPD6531E
Boot Key: Call+OK+Left

Flash File Format: PAC

File Type: ZIP

File Size: 6.45MB

Password⇒ infinityrom.com

Link: MediaFire