QMobile i2 Power Flash File SPD7731 Dead Recover 100% Tested PAC file

Advantages Of QMobile i2 Power Stock ROM

⇒Stock ROM will solve QMobile i2 Power hanged on logo problem.
⇒Flashing stock firmware will solve restart loop on QMobile i2 Power.
⇒Unbrick and dead recover by flashing stock ROM on QMobile i2 Power.
⇒Flash Stock ROM to Unroot, Upgrade and Downgrade QMobile i2 Power.
⇒Flash firmware to get back in Stock condition and gain warranty again.
⇒Stock Rom will solve if any app unfortunately has stopped working on QMobile i2 Power.

CM2 Readed Info

Phone found! [ 16 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0   
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name  : i2_POWER
Model Brand : QMobile
Model Device: i2_POWER
AndrVersion : 6.0
BaseBand CPU: SP7731CEA
Project Ver : QMobile_i2_POWER_MP_08_11
Model Ext   : QMobile i2 POWER

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.23.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Read Ok] : cache.img
[Read Ok] : recovery.img
[Read Ok] : userdata.img

AndroidInfo created
Firmware Size : 2703 MiB
Saved to : D:\SP7731CEA_i2_POWER_6.0_QMobile_i2_POWER_MP_08_11_QMobile_i2_POWER\
Done!

PRE-Requirements:

1. Laptop or PC (Running on Microsoft Windows)
2. Good quality USB DATA Cable
3. Spreadtrum (SPD) USB Drivers
4. SPD Upgrade Tool For PC
5. Stock ROM for QMobile i2 Power

How To Flash QMobile i2 Power Without BOX?

1. First of all, you need to download and install SPD USB Drivers on PC,  if already installed skip this step.
2. Now you need to download Firmware (Stock ROM) PAC flash file for your SPD Android phone.
3. Download and Extract SPD (Spreadturm) Flashing tool. After extracting open it.
4. Within the Spreadtrum Upgrading Tool click on setting icon and upload  PAC flash file.
5. Turn off your phone and connect USB data cable while holding Vol Up+Vol Down Button (Boot Key) then click on Download button.
6. Flashing process will be started, wait until Green Passed message appears.

Disclaimer: infinityrom.com is  not responsible for any damage caused to your phone. Please backup you phone firmware and important user data before flashing. Your all user data will be erased during flashing procedure.

Firmware Details And Link

Brand Name: QMobile

Model Name: i2 Power

CPU Name: SPD (Spreadtrum)

CPU Type: SP7731CEA

Android Version: 6.0

Flash File Format: PAC
Download Link: Mega.nz

ZIP File Size: 1.20GB
Password ⇒ infinityrom.com